DIGITAL MULTIMETER DIGITAL MULTIMETER IT-98M High accuracy instrument RS232 interface SENSITIVITY 20 kΩ/V DC - 4 kΩ/V AC PRECISION Volt-Ampère DC ±2% f.s. Volt-Ampère AC ±2% f.s. Ohm ±2% RANGES Volt DC 100 mV - 2V - 10V - 50V - 200V - 500V - 1000V Ampère DC 50 μA - 500 μA - 5 mA - 50 mA - 500 mA - 5 A Volt AC 10V - 50V - 250V - 750V(2500 V with mod. 19 optional) Ampère AC 250 μA - 2,5 mA - 25 mA - 250 mA - 2,5A Ohm Ωx1 - Ωx10 - Ωx100 - Ωx1000(range 0 - 10 MΩ) Capacity 22 μF - 220 μF - 2200 μF - 22000 μF(ballistic method measurement) Decibel from -10dB to +62dB (4 ranges) FUNCTION audibile continuity (buzzer) diode and transistors test LED test battery check 1,5 V and 9 V lowΩ from 0 to 500Ω PROTECTION galvanometer by means of silicon diodes - Ω by means of fuse and threshold control POWER SUPPLY 9V battery type 6F22 DIMENSIONS 128 x 96 x 35 mm WEIGHT 300 gr EQUIPMENTS set of test leads - lowΩ U bolt - one spear fuse housed inside - double bottomed case operating instructions VC8045 4 1/2 True RMS Bench-top Digital Multimeter -25 ranges, 19.999 counts max. 40mm high digit LCD. -Unit symbol display. -True RMS measurement. -Frequency response: 50Hz ~ 50kHz. -Input impedance: 10MO. -Best accuracy: ±0.05%. - DCV: 200mV to 1000V. - ACV: 200mV to 750V. - DCC: 20mA to 20A. - ACC: 20mA to 20A. - Resistance: 200O to 20MO. - Frequency: 20kHz to 200kHz. - Diode check. - Continuity test (audible). Product Research No liabilities are given or implied for the specification and photographs printed in this page. Technical alteration reserved. Copyright © 1995, italtec srl.